Welcome on Euronorm Portal
Menu

Sorry, nothing in cart.

Worm Gear Reducers

Gearsize:
Ratio:
Type of input:
Input size:
Output torque [Nm]
Radial load [N]
  • The wormgear reducer is a size 110 Cast iron gearbox with a ratio of 10. The gearbox has an D=28mm L=60mm Full Input Shaft and a D=42mm hollowshaft output with key. The wormgear reducer weights 35 kg and is standard coated in RAL5010.

  • The wormgear reducer is a size 110 Cast iron gearbox with a ratio of 100. The gearbox has an D=28mm L=60mm Full Input Shaft and a D=42mm hollowshaft output with key. The wormgear reducer weights 35 kg and is standard coated in RAL5010.

  • The wormgear reducer is a size 110 Cast iron gearbox with a ratio of 15. The gearbox has an D=28mm L=60mm Full Input Shaft and a D=42mm hollowshaft output with key. The wormgear reducer weights 35 kg and is standard coated in RAL5010.

  • The wormgear reducer is a size 110 Cast iron gearbox with a ratio of 20. The gearbox has an D=28mm L=60mm Full Input Shaft and a D=42mm hollowshaft output with key. The wormgear reducer weights 35 kg and is standard coated in RAL5010.

  • The wormgear reducer is a size 110 Cast iron gearbox with a ratio of 25. The gearbox has an D=28mm L=60mm Full Input Shaft and a D=42mm hollowshaft output with key. The wormgear reducer weights 35 kg and is standard coated in RAL5010.

  • The wormgear reducer is a size 110 Cast iron gearbox with a ratio of 30. The gearbox has an D=28mm L=60mm Full Input Shaft and a D=42mm hollowshaft output with key. The wormgear reducer weights 35 kg and is standard coated in RAL5010.

  • The wormgear reducer is a size 110 Cast iron gearbox with a ratio of 40. The gearbox has an D=28mm L=60mm Full Input Shaft and a D=42mm hollowshaft output with key. The wormgear reducer weights 35 kg and is standard coated in RAL5010.

  • The wormgear reducer is a size 110 Cast iron gearbox with a ratio of 50. The gearbox has an D=28mm L=60mm Full Input Shaft and a D=42mm hollowshaft output with key. The wormgear reducer weights 35 kg and is standard coated in RAL5010.

  • The wormgear reducer is a size 110 Cast iron gearbox with a ratio of 60. The gearbox has an D=28mm L=60mm Full Input Shaft and a D=42mm hollowshaft output with key. The wormgear reducer weights 35 kg and is standard coated in RAL5010.

  • The wormgear reducer is a size 110 Cast iron gearbox with a ratio of 7.5. The gearbox has an D=28mm L=60mm Full Input Shaft and a D=42mm hollowshaft output with key. The wormgear reducer weights 35 kg and is standard coated in RAL5010.

  • The wormgear reducer is a size 110 Cast iron gearbox with a ratio of 80. The gearbox has an D=28mm L=60mm Full Input Shaft and a D=42mm hollowshaft output with key. The wormgear reducer weights 35 kg and is standard coated in RAL5010.

  • The wormgear reducer is a size 130 Cast iron gearbox with a ratio of 10. The gearbox has an D=30mm L=80mm Full Input Shaft and a D=45mm hollowshaft output with key. The wormgear reducer weights 48 kg and is standard coated in RAL5010.

  • The wormgear reducer is a size 130 Cast iron gearbox with a ratio of 100. The gearbox has an D=30mm L=80mm Full Input Shaft and a D=45mm hollowshaft output with key. The wormgear reducer weights 48 kg and is standard coated in RAL5010.

  • The wormgear reducer is a size 130 Cast iron gearbox with a ratio of 15. The gearbox has an D=30mm L=80mm Full Input Shaft and a D=45mm hollowshaft output with key. The wormgear reducer weights 48 kg and is standard coated in RAL5010.

  • The wormgear reducer is a size 130 Cast iron gearbox with a ratio of 20. The gearbox has an D=30mm L=80mm Full Input Shaft and a D=45mm hollowshaft output with key. The wormgear reducer weights 48 kg and is standard coated in RAL5010.

  • The wormgear reducer is a size 130 Cast iron gearbox with a ratio of 25. The gearbox has an D=30mm L=80mm Full Input Shaft and a D=45mm hollowshaft output with key. The wormgear reducer weights 48 kg and is standard coated in RAL5010.

Do you need some help?
Please call us at +31 (0) 252 228850